1. Welcome to CAST's newly designed and improved Forum

    Log in or Sign up and share the knowledge!

    Dismiss Notice

Align to view on layouts

Discussion in 'Technical Support' started by Floriaan, Apr 21, 2020.

  1. Floriaan

    Floriaan Well-Known Member

    Joined:
    Feb 13, 2015
    Messages:
    385
    Likes Received:
    81
    I have text in my Cad with a call-out and arrow and align to view switched on, something goes wrong in layouts when the cad is inserted with a 90 degree rotation angle. The arrow stays in the same position, but the text ends up far from the insertion point.
     
  2. Dany

    Dany Administrator
    Staff Member

    Joined:
    Jan 16, 2014
    Messages:
    846
    Likes Received:
    91
    I've asked QA to investigate. If it turns out to be a problem, we will fix it.
     
  3. Dany

    Dany Administrator
    Staff Member

    Joined:
    Jan 16, 2014
    Messages:
    846
    Likes Received:
    91
    Hey Floriaan,

    QA confirmed that the fixes we made to issues regarding Align to View in R42 (there were a few, and what you described seems to be one of these) remain in effect in R44. As such, this is either something new or an edge case that was not caught during testing, so they've asked you to submit the file where this is happening to tech support, so they can have a detailed look. Please do this and continue to work with them on this.


    Thanks!
     

Share This Page