1. Welcome to CAST's newly designed and improved Forum

    Log in or Sign up and share the knowledge!

    Dismiss Notice

bring Rigging Points to front

Discussion in 'wysiwyg' started by Fischmaster3000, May 14, 2018.

  1. Fischmaster3000

    Fischmaster3000 New Member

    Joined:
    May 14, 2018
    Messages:
    2
    Likes Received:
    1
    i don't know what I'm doing wrong, but it is impossible to bring rigging points and text to front.
    is there anything i need to know except document settings drawing order and the two buttons "bring to front" "bring to back"?

    thank you so much for your help :)

    screenshot.5.jpg
     
    bloomy likes this.
  2. Dany

    Dany Super Moderator

    Joined:
    Jan 16, 2014
    Messages:
    643
    Likes Received:
    51
    Hi,

    You are doing nothing wrong. Rigging Points are simply not considered for Draw Order yet.. this issue will be addressed (along with many others related to Rigging Points) in the upcoming WYSIWYG R41, which is due this summer.


    Thanks,
     
  3. Fischmaster3000

    Fischmaster3000 New Member

    Joined:
    May 14, 2018
    Messages:
    2
    Likes Received:
    1
    Oh ok, thank you. It was driving me crazy haha :)
     
  4. bloomy

    bloomy New Member

    Joined:
    Feb 5, 2017
    Messages:
    7
    Likes Received:
    0
    Hey Dany,

    Having the same issue with R41, using the Rigging point tool.
    Also having issues with the "rigging point list" not filling either.
     
  5. darren powell

    darren powell New Member
    Staff Member

    Joined:
    Mar 8, 2017
    Messages:
    11
    Likes Received:
    2
    Hi there,
    You need to adjust the Draw Order (under Options>Document Options>Draw Defaults) so that the 'Rigging Points' is above the 'Hang Structures' or higher if required. This is if you are using document defaults. If you are not please check the Draw Order (under View Options>Draw options) for the selected view.
    If further assistance is required please send your issue to Technical Support (techsupport@castgroupinc.com) detailing the problem, who will investigate further.

    Thanks
     

Share This Page