1. Welcome to CAST's newly designed and improved Forum

    Log in or Sign up and share the knowledge!

    Dismiss Notice

can't conect martin M- PC to r32

Discussion in 'Technical Support' started by motiaroshas, Feb 28, 2014.

  1. motiaroshas

    motiaroshas New Member

    Joined:
    Feb 28, 2014
    Messages:
    6
    Likes Received:
    0
    hello i try to conect M-PC to r 32 but no luck.
    i try with wyiglizer,i can see the conection on the live mode but nothing happend on screen.
    I use it on the same pc.
    I change the IP.
    I try with loop back.

    thank you.
     
  2. Dany

    Dany Super Moderator

    Joined:
    Jan 16, 2014
    Messages:
    717
    Likes Received:
    67
    Hello Moti,

    Please attempt to connect via the Art-Net driver that comes with WYSIWYG. Everything there is to know about this connection may be found in Appendix D of the WYSIWYG Release 32 Reference Guide. If you have a loopback adapter installed on your computer you may have to uninstall it as it may interfere with the Art-Net stream.


    Cheers,

    Dany
     
  3. zzoostmy

    zzoostmy New Member

    Joined:
    Jan 31, 2015
    Messages:
    1
    Likes Received:
    0
    Thanks for sharing such information. I like that keep it up
     
    #3 zzoostmy, Jan 31, 2015
    Last edited by a moderator: Feb 14, 2015
  4. jose manuel prieto

    jose manuel prieto New Member

    Joined:
    Feb 26, 2016
    Messages:
    2
    Likes Received:
    0
    hi how did solve your problem?i have the same problem
     
  5. jose manuel prieto

    jose manuel prieto New Member

    Joined:
    Feb 26, 2016
    Messages:
    2
    Likes Received:
    0
    Hi, I would like to know if you could help me connect wysiwyg and m-pc from 2 different computers. since if I do it from a single computer I can not resist the video card. Thank you
     
  6. Dany

    Dany Super Moderator

    Joined:
    Jan 16, 2014
    Messages:
    717
    Likes Received:
    67
    The process is the same. For R41, the instructions have moved to Appendix B of the Reference Guide; these instructions talk about an sACN connection, so if the m-pc console can output this protocol, use it; if not, the same instructions apply for the Art-Net protocol. For more information about this, please see the following thread: http://forums.cast-soft.com/index.php?threads/connecting-to-art-net-and-sacn-streams.674/.

    If you are still unable to connect, you may email techsupport(at)cast(hyphen)soft(dot)com regarding this, and include the Serial Code of the dongle you are using, along with the name, email address and company name of the person to whom this dongle is registered. In order for us to provide assistance with this particular issue, your Membership must be up-to-date.


    Regards,
     

Share This Page