1. Welcome to CAST's newly designed and improved Forum

    Log in or Sign up and share the knowledge!

    Dismiss Notice

help. R43 Patching and viz

Discussion in 'Technical Support' started by Russell Thompson, Dec 14, 2019.

  1. Russell Thompson

    Russell Thompson New Member

    Joined:
    Dec 14, 2019
    Messages:
    2
    Likes Received:
    0
    Having issues getting Wysiwyg Rand with ETC Gio

    after failing with a large plot fro version 42 I have now drawn a 7 unit plot on 43. 5 source fours patch 1-5 and a vl 4k and a vl wash. Patched everything to DMX A and in live mode I have both Artnet and sAcn as devices but no control over anything. Gio is spiting out sACN & Art net -DMX A is slected to port 1 I know its gotta be something stupid im forgeting Please help time crunch. Thanks Russell
     
  2. Floriaan

    Floriaan Well-Known Member

    Joined:
    Feb 13, 2015
    Messages:
    385
    Likes Received:
    80
    Check windows firewall settings. It somehow switches itself back on after updates sometimes.
     
    Henry Ashton likes this.
  3. Russell Thompson

    Russell Thompson New Member

    Joined:
    Dec 14, 2019
    Messages:
    2
    Likes Received:
    0
    Thank You. Ends up I didn't bind the outputs as the Drafting was created in R42 Had to shut off my old friend EDMX and Artnet.. Once I had everything over to sACN and bounded it works like a champ.. This was first big project since moving to R43. Thank You
     
  4. Henry Ashton

    Henry Ashton New Member

    Joined:
    Dec 30, 2019
    Messages:
    3
    Likes Received:
    0
    I never thought it might help... Thank you!
     

Share This Page