1. Welcome to CAST's newly designed and improved Forum

    Log in or Sign up and share the knowledge!

    Dismiss Notice

Release Notes for 2.0.1 BETA

Discussion in 'Release Notes' started by Marty, Jan 30, 2016.

  1. Marty

    Marty Administrator

    Joined:
    Feb 27, 2014
    Messages:
    17
    Likes Received:
    0
    Release note for 2.0.1 BETA

    Notes

    IMPORTANT: When updating to BlackTrax v2.0.1 from 1.x, you must first uninstall BlackTrax v1.x before installing v2.0.1. This can be done with the v1.x installer; once run it will prompt you to remove BlackTrax. Follow the steps to remove BlackTrax, then copy the new installer into the Installation Management folder and upgrade as per normal. As BlackTrax will be installing new, please ensure the installer installs for all users on the machine.

    As this is a BETA, please be mindful of possible bugs and unexpected behavior. Please report all bugs to support@blacktrax.ca.

    When upgrading from v1.x, all application settings will be re-set to defaults – if you changed any default settings please verify each application to ensure your system is still configured correctly. Please see releases notes below for more information.

    There is a new licensing security system used to authorize hardware devices with the BTServer. Please be sure to download the required license files and follow the instructions found here. Note that for this release, your system will only warn you if your license is invalid, but will not prevent access to any features or functionally.

    Dongle Date Requirement:

    August 4[SUP]th[/SUP] 2015

    Major changes:

    • Overwrite or keep option for Trackables and Fixtures during paste
    • Frame offset updates
    • Beacon Patch filtering
    • Bugs fixes and design updates
    Known issues:


    • When a recording is stopped in Motive with the Edit Tools window open, Motive will crash
    • Motive reconstruction bounds are inverted on the X axis (minimum X actually affects the maximum X)
    • Only 12-bit operation is supported (8-bit systems currently do not work)
    • Fixture settings with drop down menus that have inconsistencies between several fixtures are not currently shown
    • Frames will still report removed beacons in Trackable Details even if they are not contributing to the final solution
    • Fixtures without iris may display they have iris enabled in table view, if set through multi-fixture settings
    • Show reporting displays the zone patch ID instead of the zone name
    Firmware:
    2.7.0.41

    Secondary Applications:
    BTWYG: 2.35.50.208
    Motive: 1.8.23633

    Compatible with RTTrP Versions:
    6
    1.8.3
    1.8.7

    Features and Fixes:

    Bug


    • Fixed: Intensity will no longer be locked out from console control if apply changes is clicked during a zone transition or a pan-flip dimming operation
    • Fixed: Pan/tilt values would be locked out from console control during fixture calibration, even after releasing the fixture from BT control
    • Fixed: Offsetting orientation for frames is no longer using radians, now it is using degrees
    • Fixed: Third Party now receives Frame orientation offset information
    • Fixed: You can no longer create a frame with the same ID as an existing beacon
    • Fixed: Frame ID no longer accepts letters in frame creation
    • Fixed: You can now deselect a frame in Frame View
    • Fixed: New projects now clear old frames from the existing project
    • Fixed: Motion indicator will no longer stop updating in certain situations
    • Fixed: Position in beacon widget no longer stops updating after you patch a beacon to a trackable
    • Fixed: Project Properties now reflects the new project file after a save as operation is preformed
    • Fixed: Save as now alerts the recent project list
    • Fixed: Running Chapters is now closable
    • Fixed: Docking widgets now dock correctly again in Tracking Adapter
    • Fixed: Imperial units now work with the new beacon design
    • Fixed: Trackable Details no longer shows four decimal places for battery status
    • Fixed: Fixture train creation is possible again, please see wiki manual for updated syntax
    • Fixed: Clear selection now clears fixtures in the several chapters tab
    • Fixed: Z-damping time now scrolls via the mouse wheel
    • Fixed: Selecting beam diameter size now selects the whole text
    • Fixed: BTWYG Calibrated Fixture position is working again
    • Fixed: Fixtures on mirrored pipes now export from BTWYG
    • Fixed: Incoming and outgoing fixture selection works with BTWYG
    • Fixed: Paperwork output now displays zoom/iris sizing
    • Fixed: There is no longer an empty space in the paperwork output next to frames
    • Fixed: Tracker and Follower’s summary page are now updated when making a change in advanced mode

    New Feature


    • Small view for Trackables now work in Live View as well
    • Beacon Patch now allows you to filter by type: Classic Beacon, Rigid Frame, or Soft Frame
    Improvement


    • Messages no longer fades out, it just disappears after five seconds
      • Renamed ‘Auto Fade’ to ‘Auto Hide’
      • This fixes the issue of Messages conflicting with other pop ups
    • When adding trackables and fixtures to the chapter editor, the added trackable/fixture is automatically selected
    • Added a dialog box when pasting fixtures and trackables that asks if you wish to overwrite or discard duplicates
    • Individual apply for centroid and orientation frame offsets

    Design Review


    • DMX Input in Live View has been cleaned up and condensed to save space
    • Added back a warning symbol for an unknown beacon (a beacon that has been patched a trackable, but is not currently in the beacon list)
    • In Beacon Patch, centroid and LED tab buttons have been reversed
    • Updated the terminology used in the device licensing warning
    • Increased the trackable icon size in the chapter editor to accommodate ‘Trackable (01)’ which is the default Trackable name coming from BTWYG
    • Chapter editor’s fixture table view now sorts by number instead of character
    • Updated all the tooltips for fixture settings
    • Fixture settings 1 of 3 is now the default, instead of 3 of 3
    • Following Option in the chapter editor has been renamed to LED Following
    • List View has been renamed to Icon View for the chapter editor and live view trackables
    • Renamed search by ‘Patching Info’ to search by ‘Spot ID’
    • Renamed prediction to sensitivity in table and list view in the chapter editor
    • Renamed ‘Beacon ID’ to ‘Frame ID’ in the Frame Calibration view
    • Messages for frame operations now refer to frames as frames and not virtual beacons
    • Removed the separator between Calibration and Show Report in the export menu
    • Renamed ‘Calibration Settings’ to ‘Fixture Calibration Settings’ in System Configuration
    • Renamed ‘Dialogue’ to ‘Assign Beacon’ in the window that appears for fixture calibration beacon assignment
    • Updated some older pop up messages to appear in the messages window instead
    • Headings of tables no longer bold when you select something in the table
    • GUI no longer starts in or resets to full screen mode by default

    Download Links:

    Server Package
    Firmware Package
     
    #1 Marty, Jan 30, 2016
    Last edited by a moderator: Feb 16, 2016

Share This Page