1. Welcome to CAST's newly designed and improved Forum

    Log in or Sign up and share the knowledge!

    Dismiss Notice

Release Notes for 2.0.2 BETA

Discussion in 'Release Notes' started by Marty, Mar 31, 2016.

  1. Marty

    Marty Administrator

    Joined:
    Feb 27, 2014
    Messages:
    17
    Likes Received:
    0
    Release note for 2.0.2 BETA

    Notes

    IMPORTANT: When updating to BlackTrax v2.0.2 from 1.x, you must first uninstall BlackTrax v1.x before installing v2.0.2. This can be done with the v1.x installer; once run it will prompt you to remove BlackTrax. Follow the steps to remove BlackTrax, then you may continue to install v2.0.2 as per normal. As BlackTrax will be installing new, please ensure the installer installs for all users on the machine.

    As this is a BETA, please be mindful of possible bugs and unexpected behavior. Please report all bugs to support@blacktrax.ca.

    When upgrading from v1.x, all application settings will be re-set to defaults - If you changed any default settings please verify each application to ensure your system is still configured correctly.

    There is a new licensing security system used to authorize hardware devices with the BTServer. Please be sure to download the required license files and follow the instructions found here. Note that for this release, your system will only warn you if your license is invalid, but will not prevent access to any features or functionally.

    Dongle Date Requirement:

    August 4th 2015

    Major changes:

    • Books – Ability to have multiple Books of Chapters, useful for having more than 255 DMX controllable chapters and for organizing Chapters into different categories/scenes, etc
    • Frame improvements – All new reporting, apply changes now works for Frames, and constructing and reset works for individual Frames
    • Bug fixes
    Known issues:
    • When a recording is stopped in Motive with the Edit Tools window open, Motive will crash
    • Motive reconstruction bounds are inverted on the X axis (minimum X actually affects the maximum X)
    • Fixture settings with drop down menus that have inconsistencies between several fixtures are not currently shown
    • Fixtures without iris may display they have iris enabled in table view, if set through multi-fixture settings
    Firmware:

    2.7.0.41

    Secondary Applications:

    BTWYG: 2.36.76.214
    Motive: 1.8.23633

    Compatible with RTTrP Versions:

    6
    1.8.3
    1.8.7

    Features and Fixes:

    Bug
    • Fixed: GUI no longer crashes when you apply changes in fixture calibration mode with no chapters
    • Fixed: Follower no longer crashes when applying changes while actively in a previously empty chapter that now has trackables and fixtures in it
    • Fixed: sACN from ETC EOS consoles no longer interferes with BlackTrax
    • Fixed: GUI crash when entering offset information into the Rigid Frame Construction widget with no Frame selected
    • Fixed: Third Party would not receive offsets made to a Rigid Frame’s orientation
    • Fixed: It is no longer possible to apply a ‘Home’ orientation for a Rigid Frame several times
    • Fixed: The selected Frame indication in Rigid Frame Construction may not always update
    • Fixed: You can no longer un-name a Frame
    • Fixed: Selection inconsistencies between Rigid Frame Construction, Frame LEDs, and centre area widget for Frame selection
    • Fixed: Frames were sometimes not being cleaned up from the Tracker Beacon list after removal
    • Fixed: Frames were not removed from the project during project close
    • Fixed: Adding, deleting, renaming, or re-ordering a Frame’s LEDs will trigger a ‘change’ in the file, thus prompting for a save at the next project change or GUI close
    • Fixed: Trackable Details no longer displays removed beacons from a Frame
    • Fixed: Tracking Adapter was sending different orientation values than what the GUI was displaying
    • Fixed: Fixture settings could be displayed on the wrong fixture depending on sort in icon view (real programming not affected, just display was affected)
    • Fixed: Following Sensitivity can become squished then disappear
    • Fixed: Show Report wouldn’t display the zone name, only underlying patch information
    • Fixed: Imperial or Metric drop down menu in Project Properties could display the opposite option in certain situations
    • Fixed: 8-Bit systems are supported again
    For full release notes, please visit this link: Release Notes.
     
    #1 Marty, Mar 31, 2016
    Last edited by a moderator: Dec 5, 2018

Share This Page