Release note for 2.0.5 Notes As of v2.0.5, the BlackTrax software downloads are for Members in good standing only. Please complete a ‘Request for Download’ at the end of the release notes to submit your information for access to the software. As part of this release, all Motive settings will be reset with the newly installed BlackTrax settings. Motive now prompts to install an optional third party software called NI-DAQ. This is not required for BlackTrax use and can be ignored. IMPORTANT: This release requires a BTServer running version July 2016 or later. Legacy servers and servers with versions prior to July 2016 must download the latest BlackTrax Server Imaging Utility and update their BTServers’ OS before upgrading to 2.0.5. Motive Dongle Date Requirement: July 26th 2016 Major changes: All new Motive 1.10 Point Cloud v4 for faster and more accurate reconstruction times Single camera calibration Cameras calibration without needing to re-set the ground plane Custom configuration of Motive settings and displays tailored for BlackTrax use Cameras number themselves based on serial number, not location anymore New GUI design to match BlackTrax and BTWYG BTWYG R37 Layer groups for better organization Fixture fill in wireframe view Everything else from the regular WYSIWYG R37 release including new fixture libraries RTTrPL output has been reduced to 50Hz instead of >100Hz BlackTrax System Update has received a facelift and now displays the currently installed version of each application Known issues: · None Firmware: 220.127.116.11 Secondary Applications: BTWYG: 18.104.22.168 Motive: 22.214.171.124 Compatible with RTTrP Versions: 6 1.8.3 1.8.7 For full release notes, please visit this link: Release Notes.