1. Welcome to CAST's newly designed and improved Forum

    Log in or Sign up and share the knowledge!

    Dismiss Notice

Rigging point

Discussion in 'The Library' started by kinglevel, Mar 1, 2016.

  1. kinglevel

    kinglevel New Member

    Joined:
    Feb 27, 2014
    Messages:
    3
    Likes Received:
    2
    Hi

    Well.. Since i cannot modify or create my own items in the library, and there are only imperial lengths and weights for motors, i here by request rigging points in metrical units. Motors, chain blocks etc...

    Or did i miss something?

    And, why, is it placed under truss, i believe it should have its own category called rigging.
    So when attached to a truss it should take note to the truss position name.
    or when detached it should be given a position of desired custom name.

    So when creating a new report, it should ask for rigging point instead of fixture or truss... And volia, x y z cordinates.

    Is it not time for us to be able to create our own librarys? let us share objects and symbols.
     
    ben and Dalight like this.

Share This Page