1. Welcome to CAST's newly designed and improved Forum

    Log in or Sign up and share the knowledge!

    Dismiss Notice

chamsys magicQ

Discussion in 'Tips & Tricks!' started by ben, Sep 21, 2018.

  1. ben

    ben Active Member

    Joined:
    Feb 6, 2014
    Messages:
    123
    Likes Received:
    11
    Hello I certainly miss something...
    I can connect magicq on pc (on the same or on another pc ) over arnet (I put an artnet device in the device manager)
    But I can't connect the magiq device ...
    Maybe I've to do something on the magicQ ...
    thanks
    wyg r41 magiq 1.7.8.1
     
  2. ben

    ben Active Member

    Joined:
    Feb 6, 2014
    Messages:
    123
    Likes Received:
    11
    IMG_20180921_225049.jpg here is the answer I ll try tomorrow
     
    Firebrand likes this.
  3. ben

    ben Active Member

    Joined:
    Feb 6, 2014
    Messages:
    123
    Likes Received:
    11
  4. ben

    ben Active Member

    Joined:
    Feb 6, 2014
    Messages:
    123
    Likes Received:
    11
    it works on the same pc... upload_2018-9-22_11-57-34.png
     
  5. Floriaan

    Floriaan Well-Known Member

    Joined:
    Feb 13, 2015
    Messages:
    587
    Likes Received:
    116
    Maybe you need to switch off your windows firewall. Make sure your routers firewall is switched on though for outside network connections.
     
  6. ben

    ben Active Member

    Joined:
    Feb 6, 2014
    Messages:
    123
    Likes Received:
    11
    thanks floriaan , effectivly it was the firewall ... I don't know why , but the network for arnet is public on my w10 familliale, so I can't turn it to private, So I've to turn the firewall for public network off, connect the magicq and turn the firewall on back and windows ask me if I want to autorise wyg... so it works!!
    Ben Pauwelsj'ai du désactiver les firwall sur les réseau public (car mon réseau ethernet est public, est pas moyen de le passer en privé...) j'ai connecté le magicq puis réactivé le firewall , et alors il m'a demandé si je voulais autoriser wyg ... et ça y est ça fonctionne avec le firewall on [​IMG];)
     
  7. Floriaan

    Floriaan Well-Known Member

    Joined:
    Feb 13, 2015
    Messages:
    587
    Likes Received:
    116
    I think this problem was introduced in the latest major upgrade to Windows 10. Firewall settings that worked fine, suddenly needed action. I’ve had this with both ArtNet and sACN.
     
    ben and Firebrand like this.
  8. Firebrand

    Firebrand Member

    Joined:
    Feb 23, 2016
    Messages:
    42
    Likes Received:
    5
    Just invested in some Chamsys gear, looking forward to playing with it and WYG.
    Seems relatively intuitive so for from what I've seen. I've taken some notes from above, so thanks ;-)
     
  9. ben

    ben Active Member

    Joined:
    Feb 6, 2014
    Messages:
    123
    Likes Received:
    11
    you are welcome this why the the forum is ;)
     
    Firebrand likes this.

Share This Page