1. Welcome to CAST's newly designed and improved Forum

    Log in or Sign up and share the knowledge!

    Dismiss Notice

WYSIWYG and Jands VIsta

Discussion in 'Tips & Tricks!' started by lhdxb_adrian, Aug 24, 2014.

  1. lhdxb_adrian

    lhdxb_adrian New Member

    Joined:
    Feb 26, 2014
    Messages:
    10
    Likes Received:
    0
    hey guys!


    i have tired and read all the tips and info's and it work but still im having this problem of not getting control of the fixtures patch to wysiwyg and to the jands vista..


    i have connect both system just the way you guys said, and it communicating.. im also getting a ping from the console.. but the moment i go to live mode on wysiwyg im not getting control of the fixtures.. is it the patch on the jands vista or patch in the wysiwyg??

    Could you guys walk me about this very quick???


    im sorry i hope that make sense, i know its like simple to you guys.. but i just cant figure it out..


    many thanks!

    Adrian
     
  2. Dany

    Dany Administrator
    Staff Member

    Joined:
    Jan 16, 2014
    Messages:
    869
    Likes Received:
    99
    Hi Adrian,

    All the instructions you require to connect to the Jands Vista are supplied on the Jands website, at http://jands.com/support-vista-v2/visualizers/. If you require further assistance, please email t e c h s u p p o r t @ c a s t - s o f t . c o m, and include the Serial Code of the dongle you are using, along with the name, email address and company name of the person to whom this dongle is registered--as this information would appear in CAST Software's database.

    UPDATE -- Dany, April 4, 2017: the information supplied in the link (which was posted in October 2014) above is now outdated. The JANDS Vista connects to WYSIWYG via either Art-Net or sACN. For instructions and information on connecting WYSIWYG to an Art-Net or sACN stream, please see the following thread: http://forums.cast-soft.com/index.php?threads/connecting-to-art-net-and-sacn-streams.674/.

    Regards,
     
    #2 Dany, Oct 6, 2014
    Last edited: Apr 3, 2017

Share This Page